Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. 800
    4. : How to remove and repair the glass of the front door of the Maruti 800

Maruti 800 - Video tutorial

Model: Maruti 800 MK 1 - Years 1984-2014
Part: Side window
Operation: How to remove and repair the glass of the front door of the Maruti 800

This guide illustrates the procedure for disassembling and repairing the side glass of the front door for the Maruti 800. Before proceeding, we recommend that you have a set of professional tools to use this job, or at least look for models similar to those shown on the screen. The following steps must be carried out in order: 1. Disassemble all the elements of the door, ie the handles and the various attached supports; 2. Remove the door inserts, therefore the various fabrics and joints that concern the upholstery; 3. If present, also remove any wiring; 4. Disassemble the mechanism that controls the opening and closing of the glass using the special crank, check if it is in good condition and possibly evaluate its regeneration as in the demonstration video or directly replace it.


Posted on 26 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos