Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of a Maruti Vitara Brezza

Model: Maruti Vitara Brezza MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

Video tutorial

Replacing the key fob battery of a Maruti Vitara Brezza is a simple task. Before you start, make sure you have a new battery of the required model, specifically a flat CR 2032 3V battery.

Take the key fob and slide the small lever located on the back of the casing to extract the key inside. Now, use a flathead screwdriver to pry open the edge of the key fob to access the casing.

Proceed to remove the old battery and replace it with the new one.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery for Maruti Brezza
How to Replace the Key Fob Battery for Maruti Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) If you want to learn how to properly replace the battery in your Maruti Brezza key fob, carefully read the following guide and follow the described s…
How to Replace the Fuel Filter in a Maruti Vitara Brezza?
How to Replace the Fuel Filter in a Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) To replace the fuel filter in a Maruti Vitara Brezza, open the hood to access the engine compartment directly under the windshield. In the center are…
How to Replace the Diesel Filter on a Maruti Vitara Brezza
How to Replace the Diesel Filter on a Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) To replace the diesel filter on a Maruti Vitara Brezza, open the hood to locate the filter positioned at the base of the windshield on the driver's s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos