Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Alto
  6. : How to replace the turn signal on the Maruti Alto

Maruti Alto - Video tutorial

Model: Maruti Alto RF - Years 2000-2014
Part: Side turn signal light bulb
Operation: How to replace the turn signal on the Maruti Alto

If we intend to personalize the car by installing amber side direction indicators, it is necessary to follow the instructions below: first remove the clips and the locking screws of the internal mudguard cover. Insert your hand inside the mudguard and push the direction indicator outwards which will come out so easily, then unhook the power connector located behind the indicator and replace it with the new one. Then refit the new indicator in the mudguard and proceed to reassemble the screws and the fastening clips of the internal panel of the mudguard itself. Finally, proceed in the same way to replace the other indicator as well.


Posted on 2 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos