Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Maruti Dzire

Model: Maruti Dzire MK 2 - Years 2012-2017
Part: Cabin air filter

If you need to clean or replace the cabin air filter, also known as the pollen filter, follow these instructions: First, access the passenger seat, open the glove compartment, and release the locks on the sides to fully tilt the drawer down. Below the drawer is the box containing the filter. To access it, open the plastic cover by releasing it and pulling it towards you. Inside, you will find the filter, which you can remove and clean or replace with a model that has the same specifications suitable for the vehicle. Then, reposition the filter in the housing, close the plastic cover, and reattach the glove compartment pins.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Maruti Dzire
Maruti Dzire (2012-2017 / MK 2) The air filter located in the engine compartment of your Maruti Dzire is a very important component that ensures maximum efficiency and reliability o…
How to Remove the Steering Wheel Airbag on a Maruti Dzire
How to Remove the Steering Wheel Airbag on a Maruti Dzire
Maruti Dzire (2012-2017 / MK 2) In this short guide, you will learn how to disassemble and replace the driver’s airbag or steering wheel airbag on a Maruti Dzire in simple and quick…
How to Replace the Cabin Air Filter on the Maruti Dzire
How to Replace the Cabin Air Filter on the Maruti Dzire
Maruti Dzire (2012-2017 / MK 2) Do you want to replace the cabin air filter on this vehicle yourself? The description below contains all the information and instructions needed to c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos