Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Dzire
    4. : How to mount an additional spoiler on the front bumper of Maruti Dzire

Maruti Dzire - Video tutorial

Model: Maruti Dzire MK 2 - Years 2012-2017
Part: Bodywork
Operation: How to mount an additional spoiler on the front bumper of Maruti Dzire

If we want to personalize your reading by installing a small front wing immediately under the bumper, it is possible to purchase an after market kit and below we will see how to mount it with the help of the video. First let's open the package with which the piece arrived, the small spoiler is essentially composed of a shaped adhesive strip that will need to be positioned immediately under the front bumper. Then remove the protective film of the adhesive step by step and start adhering the profile to the bodywork which we would have cleaned and degreased carefully before following the entire profile of the bumper and at the ends fix the two screws supplied to complete the job.


Posted on 4 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos