Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Dome Light Bulbs of the Maruti Ertiga

Model: Maruti Ertiga MK 2 - Years 2018-2025
Part: Interior dome light bulb

In this short and simple guide, we will see how to remove and replace the bulbs of the cabin dome light of the Maruti Ertiga. First, get inside the vehicle and start removing the small plastic dome light found on the ceiling; to do this, use something thin and pointed to insert into the designated slot, as shown in the video. At this point, remove the small bulb inside, replacing it with a new one (in this case, a new LED bulb is installed); then reinstall the small dome light!

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Set the Time on a Maruti Ertiga
How to Manually Set the Time on a Maruti Ertiga
Maruti Ertiga (2012-2018 / MK 1) If the instrument cluster of your first-generation Maruti Ertiga (2012-2018) displays an incorrect time and you want to change it manually, follow th…
How to Change the Engine Oil and Oil Filter on the Maruti Ertiga
Maruti Ertiga (2018-2025 / MK 2) This short and simple guide will show you how to perform routine maintenance by changing the engine oil and oil filter on the Maruti Ertiga. First, l…
How to Reset the Airbag Light on a Maruti Ertiga?
How to Reset the Airbag Light on a Maruti Ertiga?
Maruti Ertiga (2012-2018 / MK 1) To reset the airbag light on a Maruti Ertiga, first check for any damage to the appropriate fuses or the wires connected to the various sensors. If t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos