Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Maruti Wagon R Stingray

Model: Maruti Wagon R Stingray MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

To replace a headlight bulb on this vehicle, follow the instructions in this description and refer to the video. First, identify the headlight that contains the bulb to be replaced, and from the back, remove the rubber cover.

Underneath, you will find the electrical connector and the bulb holder, which you can detach and pull out. Then, take the new bulb, being careful not to touch the glass with your fingers, and snap it back into place. Finally, reconnect the rear electrical connector and reinsert the rubber cover.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Maruti Wagon R Stingray?
How to Replace the Cabin Air Filter on a Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2019-2026 / MK 3) To replace the cabin air filter on a Maruti Wagon R Stingray, open the glove compartment located on the passenger side to release the internal clips …
How to Replace the Air Filter on a Maruti Wagon R Stingray?
How to Replace the Air Filter on a Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2010-2017 / MK 2) To replace the air filter on a Maruti Wagon R Stingray, open the hood to access the components inside the engine compartment. In the center of the co…
How to Replace the Cabin Air Filter in the Maruti Wagon R Stingray?
How to Replace the Cabin Air Filter in the Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2010-2017 / MK 2) As shown in this tutorial, replacing the cabin air filter in the Maruti Wagon R Stingray is a very simple and quick task. You won't need any special …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos