Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the chassis number located on the LDV D90?

Model: Maxus D90 MK 1 - Years 2017-2024
Part: Checks and maintenance

The LDV D90 is a large SUV built in China by Saic, one of the largest Chinese manufacturers, also the owner of the Maxus brand. In fact, the LDV D90 has a lot in common with the Maxus D90 with which it shares the chassis. The LDV acronym stands for "Leyland Daf Vehicles", historic brands acquired by SAIC in 2009. Prices are extremely competitive, but the quality and finishes are not yet up to European standards. The legal chassis number of this vehicle (VIN) is stamped on the front longitudinal beam of the car, and to see it you need to remove the right front wheel.

Posted on 21 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery in the LDV D90 remote control?
How to replace the battery in the LDV D90 remote control?
Maxus D90 (2017-2024 / MK 1) In this tutorial, we can see how to replace the battery of the LDV D90 remote control, an extremely simple and quick operation. To do this, we will n…
Guide to using the Maxus D90 Infotainment system.
Guide to using the Maxus D90 Infotainment system.
Maxus D90 (2017-2024 / MK 1) In this short and simple guide, we will see the main functions of the Maxus D90 infotainment system, following the instructions below. First, we get …
How to remove the rear emblems of the Maxus D90
How to remove the rear emblems of the Maxus D90
Maxus D90 (2017-2024 / MK 1) Today we will see, in this video tutorial, how to remove all the writings located on the rear door of the trunk of the Maxus D90, following the instr…

How to Remove the Handbrake Button on a VW Passat

Have you encountered problems with the electric handbrake button on your Passat? Here’s how to proceed with the disassembly and reassembly of the part. Open the inspection compartment at the bottom left of the dashboard. Reach in and locate the handbrake button (from the inside of the dashboard). Press the button until it comes out of its housing, then disconnect the button from the power cable. Install the new handbrake button: first connect the plug to the button, then insert it into the dashboard housing. Finally, test the correct operation of the brake.

Watch the video!


by ScegliAuto

More videos