Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. G10
    4. : Maxus G10 speaker replacement guide

Maxus G10 - Video tutorial

Model: Maxus G10 MK 1 - Years 2014-2023
Part: Loudspeaker
Operation: Maxus G10 speaker replacement guide

In today's video tutorial we will see the instructions on how to disassemble and replace the front speakers of the Maxus G10, in simple and quick steps. First we open the front door and start unscrewing the fastening screws of the front door panel, in order to remove it; then disconnect the electric connector of the push-button panel and the cable of the handle. At this point unscrew the fixing screws of the loudspeaker, using a cross screwdriver; we disconnect the electrical power connector to remove and replace the case with the new one, applying the reverse procedure!


Posted on 4 June 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos