Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 7
    4. : Checks and maintenance

Mazda Cx 7 - Checks and maintenance

Mazda Cx 7 (2006-2012 / MK 1)
How to reset the service light on the Mazda CX-7?
In this tutorial we can see how to reset the service in the Mazda CX-7, an extremely simple and quick operation, to be carried out only once all scheduled …read all…
Posted on 9 March 2024 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
Where is the AdBlue tank located in the Mazda CX-7?
In this video we can see where the AdBlue liquid tank is located in the Mazda CX-7 and how to proceed in case we need to top it up. This operation must be …read all…
Posted on 31 May 2023 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
How do you reset the adblue warning light in the Mazda Cx 7?
When the adblue warning light comes on in the Mazda Cx 7 instrument panel, it should go out automatically when the latter is topped up. If this is not the …read all…
Posted on 19 October 2022 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
How to reset the Mazda CX-7 AdBlue warning light
Let's see in this short guide how to reset the Mazda CX-7 missing AdBlue warning light; the AdBlue warning light comes on due to a lack of fluid in the special …read all…
Posted on 7 September 2022 by ScegliAuto
Airbags (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (2) Battery (2) Coil (1) Arm (1) Spark plugs (1) Glove box (1) Key (4) Timing belt (2) Air conditioning controls (2) -board computer (1) Checks and maintenance (4) Dashboard (2) Bearing (1) Brake discs (1) Electric fan (1) Headlight (1) Tail light (2) Particulate filter (1) Air filter (5) Cabin air filter (4) Injectors (1) Light bulb (2) Rear light bulb (4) Interior lights ceiling light bulb (1) Antifreeze liquid (2) License plate light (1) Handle (1) Engine (4) Window motor (2) Gear oil (1) Door panel (4) Front bumper (2) Rear bumper (3) Pump (3) Fuel pump (1) Push button (1) Instrument cluster (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Drive shaft (1) Brake system (1) Outside rearview mirror (1) Thermostat (2) Engine head (1) Central tunnel (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos