Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 7
    4. : Cabin air filter

Mazda Cx 7 - Cabin air filter

Mazda Cx 7 (2006-2012 / MK 1)
Cabin air filter replacement
The passenger compartment air filter is located on the passenger side, behind the glovebox drawer: in order to access the filter seat, it is therefore …read all…
Posted on 27 August 2023 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
Cabin air filter replacement
The passenger compartment air filter is located behind the glovebox on the passenger side: in order to replace it, it is necessary to open the door of the …read all…
Posted on 25 August 2023 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
Change the cabin air filter of your car
Changing the filter of your car is a very important operation because it allows the air duct of your car to breathe much better. It is important to replace it …read all…
Posted on 25 July 2023 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
Cabin air filter replacement
The passenger compartment air filter is located on the passenger side behind the glovebox: therefore open the door of the glovebox and press on the two stop …read all…
Posted on 15 July 2023 by ScegliAuto
Airbags (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (2) Battery (2) Coil (1) Arm (1) Spark plugs (1) Glove box (1) Key (4) Timing belt (2) Air conditioning controls (2) -board computer (1) Checks and maintenance (4) Dashboard (2) Bearing (1) Brake discs (1) Electric fan (1) Headlight (1) Tail light (2) Particulate filter (1) Air filter (5) Cabin air filter (4) Injectors (1) Light bulb (2) Rear light bulb (4) Interior lights ceiling light bulb (1) Antifreeze liquid (2) License plate light (1) Handle (1) Engine (4) Window motor (2) Gear oil (1) Door panel (4) Front bumper (2) Rear bumper (3) Pump (3) Fuel pump (1) Push button (1) Instrument cluster (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Drive shaft (1) Brake system (1) Outside rearview mirror (1) Thermostat (2) Engine head (1) Central tunnel (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos