Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 7
    4. : Engine

Mazda Cx 7 - Engine

Mazda Cx 7 (2006-2012 / MK 1)
Car fuel line replacement
The following guide gives instructions on how to replace the fuel line in the car. Disconnect the negative terminal of the battery, this to avoid sparks while …read all…
Posted on 16 September 2023 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
Removing the engine plastic cover
In order to remove the plastic cover applied directly to the engine, first of all, the two expansion clips applied to the two front ends and which secure the …read all…
Posted on 14 September 2023 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
How to disconnect and replace the motor harness.
First of all, disconnect the battery cable by unscrewing the two bolts located respectively at the top right of the engine compartment (driver's side) and on …read all…
Posted on 6 September 2023 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
Air mass sensor replacement
The mass air sensor, better known as mass air flow sensor, has a fundamental function for the regular power supply by the engine: it provides in real time, to …read all…
Posted on 3 September 2023 by ScegliAuto
Airbags (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (2) Battery (2) Coil (1) Arm (1) Spark plugs (1) Glove box (1) Key (4) Timing belt (2) Air conditioning controls (2) -board computer (1) Checks and maintenance (4) Dashboard (2) Bearing (1) Brake discs (1) Electric fan (1) Headlight (1) Tail light (2) Particulate filter (1) Air filter (5) Cabin air filter (4) Injectors (1) Light bulb (2) Rear light bulb (4) Interior lights ceiling light bulb (1) Antifreeze liquid (2) License plate light (1) Handle (1) Engine (4) Window motor (2) Gear oil (1) Door panel (4) Front bumper (2) Rear bumper (3) Pump (3) Fuel pump (1) Push button (1) Instrument cluster (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Drive shaft (1) Brake system (1) Outside rearview mirror (1) Thermostat (2) Engine head (1) Central tunnel (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos