Do it yourself
| ||||
|
Mazda Cx 7 - Steering wheel
Mazda Cx 7 (2006-2012 / MK 1)
Steering wheel removal of your car The action of disassembling the steering wheel of your car requires patience and time available. The guide provides some useful tips for removing the steering …read all… Posted on 11 September 2023 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
Cruise control disassembly instructions In order to remove the cruise control controls on the steering wheel, the flywheel itself must be removed, starting with the removal of the airbag; behind the …read all… Posted on 29 August 2023 by ScegliAuto Airbags (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (2) Battery (2) Coil (1) Arm (1) Spark plugs (1) Glove box (1) Key (4) Timing belt (2) Air conditioning controls (2) -board computer (1) Checks and maintenance (4) Dashboard (2) Bearing (1) Brake discs (1) Electric fan (1) Headlight (1) Tail light (2) Particulate filter (1) Air filter (5) Cabin air filter (4) Injectors (1) Light bulb (2) Rear light bulb (4) Interior lights ceiling light bulb (1) Antifreeze liquid (2) License plate light (1) Handle (1) Engine (4) Window motor (2) Gear oil (1) Door panel (4) Front bumper (2) Rear bumper (3) Pump (3) Fuel pump (1) Push button (1) Instrument cluster (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Drive shaft (1) Brake system (1) Outside rearview mirror (1) Thermostat (2) Engine head (1) Central tunnel (1) Interior blower (1) Steering wheel (2) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |