Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 7
    4. : Tail light

Mazda Cx 7 - Tail light

Tail Light Mazda Cx 7 (2006-2012 / mk 1)

Mazda Cx 7 (2006-2012 / MK 1)
Instructions for Removing the Rear Light
Removing the rear light on this car model is quite simple: once the rear bonnet is open, locate the cap on the internal trim of the boot, positioned directly …Read all…
Posted on 6 March 2026 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
Instructions for Removing Rear Light
To remove the rear light, access the boot by opening the tailgate and locate the plastic grille directly behind the light; once the grille is removed, you can …Read all…
Posted on 25 February 2026 by ScegliAuto
Airbag (1) Speaker (1) Shocks (1) Air conditioning (1) Car stereo (2) Battery (1) Ignition coil (1) Control arm (1) Spark plugs (1) Glove compartment (1) Key (7) Timing belt (4) A/C controls (2) Checks and maintenance (2) Dashboard (2) Bearing (1) Brake rotors (1) Electric cooling fan (1) Headlight (2) Tail light (2) Diesel particulate filter (1) Air filter (5) Cabin air filter (4) Parking brake (1) Fuel injectors (1) Light bulb (2) Headlight bulb (1) Tail light bulb (5) Interior dome light bulb (1) Antifreeze coolant (2) License plate light (1) Handle (1) Engine (4) Power window motor (2) Transmission fluid (1) Door trim panel (5) Front bumper (2) Rear bumper (3) Pump (3) Fuel pump (1) Push button (1) Instrument cluster (1) Radiator (2) Heater core (1) Fuse box (4) Seat (1) Axle shaft (1) Brake system (1) Suspension system (1) Side mirror (1) AdBlue warning light (8) Warning light – error code (1) Service warning light (1) Engine mount (1) Thermostat (2) Cylinder head (2) Center console tunnel (1) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos