Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Cx 7
  6. : Power window motor

Mazda Cx 7 - Power window motor

Power Window Motor Mazda Cx 7 (2006-2012 / mk 1)

Mazda Cx 7 (2006-2012 / MK 1)
Replacing the Electric Window Motor

The first step to replace an electric window motor is to purchase a new one from an auto parts store. The replacement procedure is straightforward; just follow …Read all…
Posted on 26 February 2026 by ScegliAuto
Mazda Cx 7 (2006-2012 / MK 1)
Window Regulator Motor Replacement

To replace the window regulator motor, first remove the door panel: one screw is located inside the handle of the panel and another in the opening lever slot; …Read all…
Posted on 11 February 2026 by ScegliAuto

Airbag (1) Speaker (1) Shocks (1) Air conditioning (1) Car stereo (2) Battery (1) Ignition coil (1) Control arm (1) Spark plugs (1) Glove compartment (1) Key (7) Timing belt (4) A/C controls (2) Checks and maintenance (2) Dashboard (2) Bearing (1) Brake rotors (1) Electric cooling fan (1) Headlight (2) Tail light (2) Diesel particulate filter (1) Air filter (5) Cabin air filter (4) Parking brake (1) Fuel injectors (1) Light bulb (2) Headlight bulb (1) Tail light bulb (5) Interior dome light bulb (1) Antifreeze coolant (2) License plate light (1) Handle (1) Engine (4) Power window motor (2) Transmission fluid (1) Door trim panel (5) Front bumper (2) Rear bumper (3) Pump (3) Fuel pump (1) Push button (1) Instrument cluster (1) Radiator (2) Heater core (1) Fuse box (4) Seat (1) Axle shaft (1) Brake system (1) Suspension system (1) Side mirror (1) AdBlue warning light (8) Warning light – error code (1) Service warning light (1) Engine mount (1) Thermostat (2) Cylinder head (2) Center console tunnel (1) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos