Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mx 5
    4. : Engine

Mazda Mx 5 - Engine

Mazda Mx 5 (1989-1997 / MK 1)
Removing the intake manifold on the Mazda MX-5
Let's see in this video tutorial how to remove the intake manifold on a Mazda Mx5 produced from 1990 to 1993. First we detach the throttle cable from the …read all…
Posted on 4 September 2022 by ScegliAuto
Mazda Mx 5 (1998-2005 / NB, MK 2)
How to restart the engine of your car
Sometimes the batteries run out quickly if you forget the headlights or lights on, so this problem is more common than you might think. In these cases, it is …read all…
Posted on 15 September 2023 by ScegliAuto
Mazda Mx 5 (1998-2005 / NB, MK 2)
Cleaning the engine intake ducts
There are many products on the market to clean the engine intake ducts: it involves starting the engine, letting it run at a speed between 2500 and 3000 rpm by …read all…
Posted on 27 August 2023 by ScegliAuto
Loudspeaker (2) Car stereo (6) Battery (1) Arm (2) Spark plugs (1) Soft top (1) Bodywork (4) Key (5) Timing belt (2) Checks and maintenance (3) Brake discs (1) Headlight (2) Tail light (1) Air filter (1) Oil filter (1) Injectors (1) Accessory Kit (4) Light bulb (1) Engine (3) Window motor (1) Starter motor (1) Engine oil (1) Front bumper (1) Brake pads (1) Tires (1) Instrument cluster (1) Radiator (1) Fuse box (1) Seat (1) Brake system (1) Engine head (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos