Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mx 5
    4. : Accessory Kit

Mazda Mx 5 - Accessory Kit

Mazda Mx 5 (1998-2005 / NB, MK 2)
Mounting LED lights on your car
The word LED represents the acronym of "Light Emitting Diode", ie light emitting diode. "Applying LEDs in cars involves a minimum of time and energy. The guide …read all…
Posted on 11 September 2023 by ScegliAuto
Mazda Mx 5 (2005-2015 / MK 3, NC)
Installation of Ipod, Iphone, Ipad, mp3 and AUX devices
The following guide shows us the installation of devices such as Iphone, Ipod, Ipad, mp3 to your car stereo. One solution for this is to install an auxiliary …read all…
Posted on 27 July 2023 by ScegliAuto
Mazda Mx 5 (1998-2005 / NB, MK 2)
How to convert door locking from mechanical to centralized
Using a specific kit you can convert the door locks of your car from mechanical to centralized. First of all you have to remove the door panel, starting by …read all…
Posted on 26 July 2023 by ScegliAuto
Mazda Mx 5 (1989-1997 / MK 1)
IPhone adapter accessory kit installation
Using the special tools that are inserted into the slots above and below the car radio to release the retaining springs, slide out the complete console and …read all…
Posted on 14 July 2023 by ScegliAuto
Loudspeaker (2) Car stereo (6) Battery (1) Arm (2) Spark plugs (1) Soft top (1) Bodywork (4) Key (5) Timing belt (2) Checks and maintenance (3) Brake discs (1) Headlight (2) Tail light (1) Air filter (1) Oil filter (1) Injectors (1) Accessory Kit (4) Light bulb (1) Engine (3) Window motor (1) Starter motor (1) Engine oil (1) Front bumper (1) Brake pads (1) Tires (1) Instrument cluster (1) Radiator (1) Fuse box (1) Seat (1) Brake system (1) Engine head (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos