Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Convert Door Lock from Mechanical to Central Locking

Model: Mazda Mx 5 MK 2, NB - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Accessory kit

See other generations:
Video tutorial

Using a specific kit, you can convert your car's door locking system from mechanical to central locking. First, remove the door panel, starting with the clip of the window winding handle.

Then unscrew the casing behind the door handle. Carefully remove the screw caps from the armrest and disassemble it. Use a flat tool to pry off the speaker grille.

Now pry off the door panel. Partially remove the film.

Now install the actuator support bracket, ensuring the actuator is parallel to the lock control rod at an angle of about 20 degrees. Connect the actuator to the lock control rod using the rod and clamp provided with the kit. Connect the wires between the actuator and the control unit, following the corresponding colours and ensuring they pass through the door without interfering with the window movement, exiting alongside the other factory cables.

Then attach the connector to the control unit and connect the latter with the red cable to a power cable (for example, from the ignition switch) and the black cable to a ground. Now, verify the correct operation, secure the control unit with ties or supports, and reassemble the door panel.

Repeat the process on the other door.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Complete Removal of the Engine Subframe
Complete Removal of the Engine Subframe
Mazda Mx 5 (1998-2005 / MK 2, NB) Removing the subframe is a complex operation as many mechanical parts must be disassembled. Remove the radiator feed pipe and block the coolant flow …
Replacement of Timing Belt
Replacement of Timing Belt
Mazda Mx 5 (1998-2005 / MK 2, NB) It is recommended to perform this maintenance only if you have good mechanical knowledge: an error in positioning the timing belt or any oil seals co…
Timing Belt Replacement
Timing Belt Replacement
Mazda Mx 5 (1998-2005 / MK 2, NB) It is recommended to perform this maintenance only if you have good general mechanical knowledge, as a simple error in positioning the belt could sev…

Other guides you may be interested in

How to Reset the EDC Light on a Mercedes Sprinter?

When the EDC light appears on the instrument cluster of a Mercedes Sprinter, it indicates a generic malfunction in the vehicle's injection system. To identify the source of the problem, a diagnosis must be performed at a workshop. This will help identify the damaged component, which will need to be replaced or repaired. Once the issue has been physically addressed, connect a diagnostic tool to the vehicle's OBD port located under the steering column. This will allow you to clear the errors in the ECU, turning off the EDC light.

Watch the video!


by ScegliAuto

More videos