Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mx 5
    4. : Complete disassembly of the engine sub frame

Mazda Mx 5 - Video tutorial

Model: Mazda Mx 5 NB, MK 2 - Years 1998-2005
Part: Bodywork
Operation: Complete disassembly of the engine sub frame

Disassembling the sub-frame is a complex operation as many mechanical parts have to be disassembled. Remove the radiator supply pipe and lock the coolant flow with a wrench. Disconnect the electrical cables of the cooling fans and the remaining pipes. With a ratchet wrench, start removing the screws from the engine guard. Remove the coolant reservoir. Remove the wheels and part of the brakes to access the underlying mechanics. Unscrew the bolts relating to the sub-frame and the various mechanical parts that prevent its removal.


Posted on 20 July 2023 by ScegliAuto



Car radio disassembly instructions
Mazda Mx 5 (2005-2015 / NC, MK 3) The first operation to be carried out is the disassembly of the plastic frames around the car radio and the air conditioner controls: start by removi
How do you replace the Mazda MX5 soft top?
Mazda Mx 5 (1989-1997 / MK 1) In order to replace the Mazda Mx 5 soft top, first of all you need to clean the rear part and above all the gasket to which the new sheet will be fix
Headlight replacement
Mazda Mx 5 (1989-1997 / MK 1) Due to aging and bad weather, the headlights tend to yellow and need to be replaced. In order to replace the headlight it is necessary to open the fr

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos