Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mx 5
    4. : Car stereo

Mazda Mx 5 - Car stereo

Mazda Mx 5 (1998-2005 / NB, MK 2)
How to remove the radio from a 2002 Mazda MX5 Miata.
In this new mini guide dedicated to your 2002 Mazda MX5 Miata, we will discover how to quickly and correctly remove the original radio. First, you need to get …read all…
Posted on 30 April 2023 by ScegliAuto
Mazda Mx 5 (2005-2015 / MK 3, NC)
Aftermarket radio installation
In order to install a new after market car stereo, it is first of all necessary to remove the stock car stereo. Start by removing the plastic cover of the …read all…
Posted on 29 July 2023 by ScegliAuto
Mazda Mx 5 (1998-2005 / NB, MK 2)
Removing the car radio
Taking out the car radio is not a difficult thing, you just need a little patience and a screwdriver, as shown in the following guide. The screwdriver can …read all…
Posted on 26 July 2023 by ScegliAuto
Mazda Mx 5 (1998-2005 / NB, MK 2)
Removal for possible repair of the car radio
To disassemble the car radio, remove the plastic plates on the sides with a screwdriver. If you have the special "U" shaped rods to be inserted in the …read all…
Posted on 21 July 2023 by ScegliAuto
Mazda Mx 5 (1998-2005 / NB, MK 2)
After market radio installation
In order to install the new car radio it is first necessary to remove the standard one: remove the plastic covers placed on the sides of the car radio and …read all…
Posted on 15 July 2023 by ScegliAuto
Mazda Mx 5 (2005-2015 / MK 3, NC)
Car radio disassembly instructions
The first operation to be carried out is the disassembly of the plastic frames around the car radio and the air conditioner controls: start by removing the …read all…
Posted on 13 July 2023 by ScegliAuto
Loudspeaker (2) Car stereo (6) Battery (1) Arm (2) Spark plugs (1) Soft top (1) Bodywork (4) Key (5) Timing belt (2) Checks and maintenance (3) Brake discs (1) Headlight (2) Tail light (1) Air filter (1) Oil filter (1) Injectors (1) Accessory Kit (4) Light bulb (1) Engine (3) Window motor (1) Starter motor (1) Engine oil (1) Front bumper (1) Brake pads (1) Tires (1) Instrument cluster (1) Radiator (1) Fuse box (1) Seat (1) Brake system (1) Engine head (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos