Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mx 5
    4. : Brake system

Mazda Mx 5 - Brake system

Mazda Mx 5 (2005-2015 / MK 3, NC)
Assembling the oversized brake system
When we are in front of the wheel hub, first of all we proceed to remove any residues on the flanged surface on which the brake disc will be mounted. Then the …read all…
Posted on 21 July 2023 by ScegliAuto
Loudspeaker (2) Car stereo (6) Battery (1) Arm (2) Spark plugs (1) Soft top (1) Bodywork (4) Key (5) Timing belt (2) Checks and maintenance (3) Brake discs (1) Headlight (2) Tail light (1) Air filter (1) Oil filter (1) Injectors (1) Accessory Kit (4) Light bulb (1) Engine (3) Window motor (1) Starter motor (1) Engine oil (1) Front bumper (1) Brake pads (1) Tires (1) Instrument cluster (1) Radiator (1) Fuse box (1) Seat (1) Brake system (1) Engine head (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos