Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. : Rx 7

Mazda Rx 7 - Video guides

Mazda Rx 7 (1991-2002 / FD, MK 3)
How to Install Front Headlights on a Mazda RX-7 DIY
On the Mazda RX-7, customising the front headlights with internal lighting requires opening the optical unit, positioning the LED modules behind the projector …Read all…
Posted on 1 July 2026 by ScegliAuto
Mazda Rx 7 (1991-2002 / FD, MK 3)
How to replace the spark plugs of the Mazda RX-7
The main instructions provided in this guide will show us how to disassemble and replace the spark plugs of the Mazda RX-7 engine. First, we open the car's …Read all…
Posted on 14 November 2025 by ScegliAuto
Mazda Rx 7 (1991-2002 / FD, MK 3)
What to do if the car doesn't start but the battery is fine
In this video, we will see how to behave when our Mazda RX-7 turns on but does not start. Can we exclude a battery problem? Not completely, because the fact …Read all…
Posted on 17 June 2025 by ScegliAuto
Mazda Rx 7 (1991-2002 / FD, MK 3)
How to Replace the Starter Motor on a Mazda RX 7?
First, lift the car using appropriate jack stands as the starter motor is located underneath, near the clutch. Then, remove the cover, remembering to …Read all…
Posted on 8 July 2026 by ScegliAuto
Mazda Rx 7 (1991-2002 / FD, MK 3)
Replacing Steering Track Rod End on Mazda Rx7
Is the steering track rod end on your Mazda Rx7 damaged? Here's how to remove it. Lift the car on a column lift to a comfortable working height. Unscrew the …Read all…
Posted on 10 April 2026 by ScegliAuto
Mazda Rx 7 (1991-2002 / FD, MK 3)
How to Replace Engine Oil and Oil Filter on a Mazda RX7
Today, you will learn how to replace the engine oil and oil filter on your Mazda RX7. This is not a very complex task; just take some care, and you can do it …Read all…
Posted on 5 April 2026 by ScegliAuto

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos