Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Front Headlights on a Mazda RX-7 DIY

Model: Mazda Rx 7 MK 3, FD - Years 1991-2002
Part: Headlight

On the Mazda RX-7, customising the front headlights with internal lighting requires opening the optical unit, positioning the LED modules behind the projector lens, and securing the wiring under a cover. Remove the headlight, heat the rim to soften the sealant, and carefully separate the parts. Prepare the LED modules with their brackets, centre them behind the lens, and secure them stably without interfering with the dipped beam. Route the cables outside using grommets, close the headlight restoring the seal with sealant, and check for leaks. Connect the positive to an ACC line via an additional fuse holder, ground to the chassis, connect any controller, and test the lighting. Protect the cables with sheathing, refit the front headlights, and check the adjustment and functionality of the main lights.

Posted on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs of the Mazda RX-7
How to replace the spark plugs of the Mazda RX-7
Mazda Rx 7 (1991-2002 / MK 3, FD) The main instructions provided in this guide will show us how to disassemble and replace the spark plugs of the Mazda RX-7 engine. First, we open the…
How to Replace Engine Oil and Oil Filter on a Mazda RX7
How to Replace Engine Oil and Oil Filter on a Mazda RX7
Mazda Rx 7 (1991-2002 / MK 3, FD) Today, you will learn how to replace the engine oil and oil filter on your Mazda RX7. This is not a very complex task; just take some care, and you c…
Replacing Steering Track Rod End on Mazda Rx7
Replacing Steering Track Rod End on Mazda Rx7
Mazda Rx 7 (1991-2002 / MK 3, FD) Is the steering track rod end on your Mazda Rx7 damaged? Here's how to remove it. Lift the car on a column lift to a comfortable working height. Unsc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos