Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Steering Track Rod End on Mazda Rx7

Model: Mazda Rx 7 MK 3, FD - Years 1991-2002
Part: Tie rods

Is the steering track rod end on your Mazda Rx7 damaged? Here's how to remove it. Lift the car on a column lift to a comfortable working height. Unscrew the wheel bolts with a socket or air impact wrench and remove the wheel. Next, start unscrewing the bolts of the track rod end with a socket. Unscrew the bolts located under the track rod end and the stabiliser bar, then pull the track rod end out from the vehicle body. Fit the new track rod end and screw in all the associated bolts. Check the integrity of the gaiter. Refit the wheel and test the vehicle.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Engine Oil and Oil Filter on a Mazda RX7
How to Replace Engine Oil and Oil Filter on a Mazda RX7
Mazda Rx 7 (1991-2002 / MK 3, FD) Today, you will learn how to replace the engine oil and oil filter on your Mazda RX7. This is not a very complex task; just take some care, and you c…
How to replace the spark plugs of the Mazda RX-7
How to replace the spark plugs of the Mazda RX-7
Mazda Rx 7 (1991-2002 / MK 3, FD) The main instructions provided in this guide will show us how to disassemble and replace the spark plugs of the Mazda RX-7 engine. First, we open the…
How to Install Front Headlights on a Mazda RX-7 DIY
How to Install Front Headlights on a Mazda RX-7 DIY
Mazda Rx 7 (1991-2002 / MK 3, FD) On the Mazda RX-7, customising the front headlights with internal lighting requires opening the optical unit, positioning the LED modules behind the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos