How to install the soft top of the Mazda MX5 (also known as Miata)

In this video we see how to install the hood on the Mazda Mx-5, also known among enthusiasts as the Miata: to remove the old hood, first we need to lower the windows and remove the rear mat, from which we must remove thirteen 10 mm bolts and the three rails on the back of the car: after removing the rain cover from its seat, it will not come out completely, so we will have to remove the seat belt, removing the large 17 mm bolt that the youtuber shows us, then we will also have to remove the two side bolts of 10 mm, then there is a cross screw on the side. We will also have to remove the kick plate, and the bracket we find on the top. Behind the seats we have a bar to remove, then we will also have to remove the cap we see on the plastic and thus slide out the seat belt. Make sure the rain cover has been removed and check the clip that we will have to remove in the corner to remove it completely. Now we need to clean this area well before installing the new hood. We will have to remove from the new hood a series of parts needed for fixing, and the youtuber shows us a very useful diagram that he used to find the various parts. We have an update of two clips to remove that we had not noticed, and that need to be removed. To proceed with the installation, it is necessary to remove the hood springs, which will be repositioned later. The video then shows a part where the new hood is reassembled and as for the installation, it is done by following backwards the parts we disassembled to remove it.