Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front windshield wipers in the Mazda CX-5?

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Windshield wipers

In this tutorial we can see how to replace the windshield wipers in the Mazda CX-5, an extremely simple and quick operation. First of all, make sure that the windshield wipers are in the resting position, if not, activate them and stop them as soon as they reach it, then lift them completely, locate the small button on the back of the brush and, holding it down, separate the brush itself from the arm. Then, place the replacement, attach the pin to the joint by pressing it firmly and repeat the operation on the opposite windshield wiper.

Posted on 13 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wipers on the Mazda CX 5
How to Replace the Front Wipers on the Mazda CX 5
Mazda CX-5 (2017-2024 / MK 2) Replacing the front wipers on your Mazda CX 5 is one of the simplest and safest operations you can perform entirely on your own, even without any mec…
Where are the fuses located in the Mazda CX-5?
Where are the fuses located in the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) The fuse boxes of the Mazda CX-5 are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: in thi…
How to Replace the Rear Wiper on the Mazda CX-5 MK2
How to Replace the Rear Wiper on the Mazda CX-5 MK2
Mazda CX-5 (2017-2024 / MK 2) In this video tutorial, you will see step-by-step instructions for removing and replacing the rear wiper, as well as the front wipers, on the second …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos