Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating resistor in the Mazda 2?

Model: Mazda 2 DH, MK 2, DE - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

Video tutorial

In this tutorial we can see how to replace the heating resistor in the Mazda 2, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then go to the passenger side, open the glove compartment and, pressing both walls inwards, release the drawer from the dashboard.

Then remove the lower cover, locate the resistor and remove it by unscrewing the two fixing screws. At this point, all that remains is to connect the replacement and reassemble everything following the reverse procedure.


Posted on 25 February 2025 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on a Mazda 2
How to Replace the Engine Air Filter on a Mazda 2
Mazda 2 (2007-2014 / DH, MK 2, DE) Replacing the engine air filter on your second generation Mazda 2 is very simple, and to complete the operation, just read the following guide and ap…
How to replace the remote battery for the Mazda 2?
How to replace the remote battery for the Mazda 2?
Mazda 2 (2014-2023 / DJ, MK 3) Replacing the remote battery for the Mazda 2, as shown in this tutorial, is an extremely simple and quick operation. You will only need a replacement…
How to reset the service indicator on the Mazda 2
How to reset the service indicator on the Mazda 2
Mazda 2 (2007-2014 / DH, MK 2, DE) If you need to manually reset the service indicator light on your Mazda 2, all you have to do is pay attention to the following steps and then put th…

Other guides you may be interested in

How to Change the Time on the Peugeot 208

Today's guide will show you how to set the clock on the Peugeot 208's onboard computer, following the instructions below. First, get in the car and turn on the instrument panel; then press and hold the settings button on the panel for a few seconds until the time starts to flash, as shown in the video. At this point, press the left button to correctly set the time, adjusting the hour first and then the minutes; exit the onboard computer menu to save all the changes made!

Watch the video!


by ScegliAuto

More videos