Do it yourself
Frequently asked questions about cars and motorcycles

Installing a Short Gear Lever

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Transmission

See other generations:
Video tutorial

Using your hands, lever at the base of the tunnel to unclip the plastic clips of the cover around the handbrake lever to remove it. Remove the screws at the bottom of the tunnel and the glove compartment, then again using your hands, lever at the base of the tunnel to detach it and disconnect all connectors by unscrewing the retaining screws from the housing.

Now you can remove the entire tunnel.

Unscrew the screws at the base of the gear lever using an electric screwdriver. Remove the gear linkage, taking care to note its initial position.

Replace the lever with the shorter one and reassemble the mechanism.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Mazda 6 (2008-2012 / MK 2, GH) The video shows how to detach the plastic covers along the centre console, specifically the one near the handbrake and the one near the gear lever: b…
Mazda 6 (2002-2008 / GG, MK 1) To remove the original car radio, the first step is to take off the central tunnel cover: position the gear lever in reverse (in drive position), uns…
Mazda 6 (2002-2008 / GG, MK 1) This video shows how to install an interface on a standard car radio. First, unscrew the gear knob and position it in R, remove the cup holder and th…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos