Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service of the Mazda BT50 (and Ford Ranger)

Model: Mazda Bt 50 UR, UP - Years 2011-2023
Part: Service warning light

In this video, we will see how to reset the service light on the Mazda BT-50 pick-up truck. The same procedure is also valid for the Ford Ranger, which at that time shared the same platform. Turn on the instrument panel without starting the engine, and press both the accelerator and brake pedals at the same time. Keep both pedals pressed for about 30 seconds. After a few seconds, we will see the wrench-shaped light start flashing. At this point, we can release the pedals. Turn off the instrument panel and then turn it back on to verify that the service light has disappeared.

Posted on 2 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Mazda BT50
Mazda Bt 50 (2011-2023 / UR, UP) The service light on a Mazda BT50 vehicle turns on when it is necessary to perform a car service. After performing the service, which includes replac…
How to Reset the Service Light on a Mazda BT50
How to Reset the Service Light on a Mazda BT50
Mazda Bt 50 (2011-2023 / UR, UP) If you notice the service light remains illuminated on the dashboard of your Mazda BT50 even after completing the service, don't worry; you just need…
How to change the language on the Mazda BT50 radio
How to change the language on the Mazda BT50 radio
Mazda Bt 50 (2011-2023 / UR, UP) In this video, you will see how to change the language setting on the Mazda BT50's radio: you will need to use the two buttons/dial located on the da…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos