Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Mazda BT50

Model: Mazda Bt 50 UR, UP - Years 2011-2023
Part: Service warning light

The service light on a Mazda BT50 vehicle turns on when it is necessary to perform a car service. After performing the service, which includes replacing fluids and filters such as oil and air, checking the timing belt, brakes, and engine, we can complete the process by resetting it. Just resetting it will not solve the problem. To reset it, we must turn on the instrument panel and press the brake and accelerator pedals simultaneously for about 10 seconds or until the service light turns off. Then release both pedals and restart the vehicle.

Posted on 3 July 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Service Light on a Mazda BT50
How to Reset the Service Light on a Mazda BT50
Mazda Bt 50 (2011-2023 / UR, UP) If you notice the service light remains illuminated on the dashboard of your Mazda BT50 even after completing the service, don't worry; you just need…
How to reset the service of the Mazda BT50 (and Ford Ranger)
How to reset the service of the Mazda BT50 (and Ford Ranger)
Mazda Bt 50 (2011-2023 / UR, UP) In this video, we will see how to reset the service light on the Mazda BT-50 pick-up truck. The same procedure is also valid for the Ford Ranger, whi…
How to change the language on the Mazda BT50 radio
How to change the language on the Mazda BT50 radio
Mazda Bt 50 (2011-2023 / UR, UP) In this video, you will see how to change the language setting on the Mazda BT50's radio: you will need to use the two buttons/dial located on the da…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos