Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Bt 50
  6. : How to reset the Mazda BT50 service light

Mazda Bt 50 - Video tutorial

Model: Mazda Bt 50 UP, UR - Years 2011-2023
Part: -board computer
Operation: How to reset the Mazda BT50 service light

If you notice the maintenance warning light on the dashboard of your Mazda BT50 continues to come on even after having carried out the relative coupon, do not worry because you will just need to perform a simple manual reset to solve everything. First make sure you start the procedure with the car completely off. Then insert the key and start the ignition. At this point, hold down both the brake pedal and the accelerator pedal at the same time for about 10-15 seconds. Then release both pedals and switch off the ignition. Turn it on again, start the engine and the reset is complete.


Posted on 13 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos