Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Mazda CX-5

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Service warning light

Below we will see how to reset the maintenance service light for the regular oil change of the Mazda CX-5. First, we get into the car and start the instrument panel; then we use the central tunnel command to go to the car settings and then to the maintenance section, as shown in the video. At this point, we go to the reset option and confirm the service reset, resetting the mileage before the next service; for confirmation, we check the reset of the warning on the instrument panel!

Posted on 22 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Mazda CX-5
How to reset the service light on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In a few steps we will see how to reset the service light for the regular maintenance of the engine oil change of the Mazda CX-5; after replacing the…
How to Reset the Service Light on the Mazda CX-5 2023
How to Reset the Service Light on the Mazda CX-5 2023
Mazda CX-5 (2017-2024 / MK 2) In this guide, discover how to correctly perform the manual reset of the service light on your new Mazda CX-5 (2023). First, enter the cabin, then tu…
How do you reset the Service light of the Mazda CX-5?
How do you reset the Service light of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) On board the Mazda CX-5, it will be possible to reset the Service light by inserting the ignition key into the corresponding slot and turning on the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos