Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a Mazda RX8 DIY

Model: Mazda Rx 8 MK 1 - Years 2003-2012
Part: Engine oil

On the Mazda RX-8, the oil change procedure begins with securely lifting the vehicle and protecting the work area. If present, remove the lower splash guard as shown, position the drain pan under the oil pan plug, and unscrew it to allow the oil to drain out. If necessary, replace the oil filter by accessing it from the indicated point, checking the gasket, and lubricating the O-ring of the new filter. Reinstall the plug (with a new washer if needed), then fill with the appropriate oil through the filler cap in the engine compartment; briefly start the engine and check for any leaks. With the engine off, after a few minutes, check the oil level using the dipstick and adjust if necessary.

Posted on 13 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Differential Oil in a Mazda Rx8
How to Replace the Differential Oil in a Mazda Rx8
Mazda Rx 8 (2003-2012 / MK 1) To replace the differential oil in a Mazda Rx8, start by removing the differential oil drain plug located behind the exhaust using a 24 mm socket. Al…
How to Change the Oil and Oil Filter on the Mazda RX-8
How to Change the Oil and Oil Filter on the Mazda RX-8
Mazda Rx 8 (2003-2012 / MK 1) Here’s how to change the oil and oil filter on your vehicle: open the bonnet and unscrew the oil filler cap located under the engine cover. Lift the …
How to Replace the Cabin Air Filter on a 2006 Mazda RX8
How to Replace the Cabin Air Filter on a 2006 Mazda RX8
Mazda Rx 8 (2003-2012 / MK 1) If you want to independently replace the cabin air filter in your 2006 Mazda RX8, simply follow all the steps described in this guide. Before startin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos