Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Rx 8
    4. : How to change the oil and oil filter on Mazda Rx8

Mazda Rx 8 - Video tutorial

Model: Mazda Rx 8 MK 1 - Years 2003-2012
Part: Engine oil
Operation: How to change the oil and oil filter on Mazda Rx8

Let's see below how to change the oil and filter on the car: open the bonnet and unscrew the oil filler cap located under the engine cover. Then raise the car and locate the oil drain plug on the side of the sump. Then proceed to unscrew the cap by placing a container underneath for the recovery of used oil, wait for all the oil to flow out and then screw the cap back on. Go back to the top of the engine compartment, unscrew the oil filter and replace it. Finally proceed to fill the system with the new specific lubricant.


Posted on 20 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos