Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open and Close the Hood on a Mazda CX-90

Model: Mazda Cx 9 TC - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

See other generations:
Video tutorial

Below are the instructions on how to properly open and close the hood of your Mazda CX-90. The steps are very simple and quick. First, go to the vehicle's interior and use the lever located on the lower left near the pedals to unlock the hood.

At this point, the hood is still latched and cannot be opened. As shown in the video, the release lever is aligned with the car logo, located under the hood.

Manually pull the lever to release the hood. Now you can fully open it, and it will be supported by two struts, one on the left and one on the right.

To close it properly, lower the hood halfway and then give it a firm push to close it.


Posted on 17 May 2026 by ScegliAuto


Related tutorials

How to Open the Fuel Door on a Mazda CX-9?
How to Open the Fuel Door on a Mazda CX-9?
Mazda Cx 9 (2007-2015 / TB) In this tutorial, you will see how to open the fuel cap on a Mazda CX-9, a very simple operation that follows the typical procedure of most vehicles.…
How to Replace the Battery in a Mazda CX-9?
How to Replace the Battery in a Mazda CX-9?
Mazda Cx 9 (2016-2024 / TC) To replace the battery in a Mazda CX-9, open the hood to access the components inside the engine compartment. The battery is located on the right sid…
How to Open the Mazda CX-9 with a Non-Working Remote
How to Open the Mazda CX-9 with a Non-Working Remote
Mazda Cx 9 (2016-2024 / TC) Learn how to open the Mazda CX-9 even with a faulty remote or a dead battery. Take your remote. At the bottom, there is a small button that, when pre…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos