Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Manual for a Mazda 3

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Fuse box

Thanks to this very short video guide, you can see all the diagrams of the two fuse boxes present in a Mazda 3, first generation model produced from 2003 to 2009. The video accurately shows the position, name, and amperage of each individual fuse and relay you will find inside your vehicle. The first fuse box is located inside the cabin, under the dashboard on the passenger side, accessible as shown in the video; the second box is situated in the engine compartment on the driver's side.

Posted on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Manual for a Mazda 3
Fuse Manual for a Mazda 3
Mazda 3 (2019-2026 / MK 4, BP) In this very useful video guide today, we will see all the fuse diagrams present in a Mazda 3, model BP of the fourth series produced from 2019 onwar…
Diagram and positioning of the internal fuses of the Mazda 3.
Diagram and positioning of the internal fuses of the Mazda 3.
Mazda 3 (2003-2009 / BK, MK 1) Let's discover the information related to the positioning of the internal fuse box of the Mazda 3. First, we get on board the car and start removing …
Where is the fuse box of the Mazda 3 located?
Where is the fuse box of the Mazda 3 located?
Mazda 3 (2003-2009 / BK, MK 1) The Mazda 3 has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the driver's side panel. The second fuse b…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos