Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mazda 3 Fuse Box Diagram

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

This video shows the location of the two fuse boxes in the Mazda 3 produced from 2009 to 2013. The first fuse box is located in the engine compartment on the driver's side, and under the cover cap, there is a fuse diagram with the corresponding ratings.

The second fuse box is located inside the cabin on the driver's side, to the left of the dashboard.

As with the engine compartment fuse box, behind the protective cover, there is a diagram with the corresponding ratings. This is useful in case you have lost the owner's manual for your vehicle.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on a 2018 Mazda 3
How to Reset the Tyre Warning Light on a 2018 Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) If you have just inflated or replaced the tyres on your 2018 Mazda 3 and want to permanently eliminate the warning light on the instrument cluster, f…
How to Manually Reset the Tyre Light on a 2016 Mazda 3
How to Manually Reset the Tyre Light on a 2016 Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) To manually reset the tyre light on the instrument cluster of your 2016 Mazda 3 takes just a few seconds. Simply follow these steps. First, get insid…
How to Replace the Engine Oil Filter on a Mazda Mazda 3
How to Replace the Engine Oil Filter on a Mazda Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) How to replace the engine oil filter on a Mazda Mazda 3? Here’s how to proceed with the replacement: lift the car with a column lift and secure it, t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos