Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a 2018 Mazda 3

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part:

If you have just inflated or replaced the tyres on your 2018 Mazda 3 and want to permanently eliminate the warning light on the instrument cluster, follow these steps. First, enter the cabin of your Mazda 3 and turn on the ignition if it is still off. Next, locate the "Set" button at the bottom left of the dashboard and hold it down for a few seconds. Once the warning light turns off, release the "Set" button and the reset procedure is successfully completed.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Mazda 3?
How to Reset the Tyre Pressure Warning Light on a Mazda 3?
Mazda 3 (2013-2019 / MK 3, BN, BM) To reset the tyre pressure warning light on a Mazda 3, first inflate all the tyres to the pressure indicated on the sticker affixed to the driver's d…
How to Reset the Tyre Pressure on a Mazda 3
How to Reset the Tyre Pressure on a Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) To reset the tyre pressure on a Mazda 3, start by adjusting the tyre pressures to the values indicated by the manufacturer (see the label on the door…
How to Reset the Tyre Pressure Light on the Mazda 3
How to Reset the Tyre Pressure Light on the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) Today, let’s discover how to reset the tyre pressure light on the Mazda 3; before resetting the TPMS sensors, ensure all four tyres are at the correc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos