|
Do it yourself
| |||
| ||||
How to Replace the Rear Brake Pads on a Mazda 2
Model: Mazda 2
DJ, MK 3
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
Today, you will learn the steps to replace the rear brake pads on a Mazda 2 independently. Park the car on a flat surface and block the wheels by engaging first gear. Loosen the wheel bolts by about half a turn using a wheel nut wrench, position the jack at the lifting point, and lift the vehicle to remove the wheel. Using a socket wrench, shift the brake caliper, remove the clips, and extract the pads. Use a wire brush and brake cleaner to remove any surface rust from the pad seats. Place the piston compressor tool on the piston and slowly retract the piston, ensuring it goes in straight. Remove the clips and springs, apply a small amount of specific grease to the metal contact points, and insert the new pads into their seats. Position the caliper over the pads and install the guide bolts using a ratchet and socket, then tighten to the specified torque. Refit the wheel and check the brakes by pressing the pedal with the vehicle stationary; check the brake fluid level before heading out on the road.
Posted on 22 November 2026 by ScegliAuto
Related tutorials
Mazda 2
(2007-2014 /
MK 2, DE, DH)
In this tutorial, you will see how to replace the rear brake shoes on a Mazda 2, a very simple and quick operation. First, park the vehicle on a flat…
Mazda 2
(2007-2014 /
MK 2, DE, DH)
The following steps will show us how to disassemble and eventually replace the rear brakes (drum and shoes) of the Mazda 2. First, lift the vehicle a…
Mazda 2
(2014-2023 /
DJ, MK 3)
In this tutorial, we will see how to replace the taillights on a Mazda 2, a very simple and quick operation. First, let's make sure that the key is n…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light on a Fiat Doblò?
To reset the tyre pressure warning light on a Fiat Doblò, you need to inflate the tyres until they reach the recommended pressure value. This value is indicated on the sticker attached to the driver's door pillar. After inflating the tyres, turn on the ignition by inserting the key. You can then press the button with the car icon on the left side of the central display. Select the option for resetting the tyre pressure and confirm with "Yes" on the message that appears next. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.085
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |