Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the tail lights on a Mazda 2?

Model: Mazda 2 MK 3, DJ - Years 2014-2023
Part: Tail light

In this tutorial, we will see how to replace the taillights on a Mazda 2, a very simple and quick operation. First, let's make sure that the key is not inserted, in order to work safely. Then, we open the trunk door and remove the cover located at the back of the light in question. Next, we disconnect the power connectors, unscrew the three fastening nuts using an 8mm socket wrench, and by pulling it outward, we separate the light from the body. At this point, all that is left to do is to position the replacement part and follow the reverse procedure.

Posted on 9 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Number Plate Lights of the Mazda 2
How to Remove the Number Plate Lights of the Mazda 2
Mazda 2 (2014-2023 / MK 3, DJ) In this video tutorial, you will learn how to remove and replace the number plate lights of the third series Mazda 2 by following these simple and qu…
Where are the Fuses Located in the Mazda 2?
Where are the Fuses Located in the Mazda 2?
Mazda 2 (2007-2014 / DE, MK 2, DH) All fuses in the Mazda 2 are divided between two fuse boxes located within the vehicle: this model has one box inside the cabin and another in the en…
How to replace the front headlight bulb of the Mazda 2
How to replace the front headlight bulb of the Mazda 2
Mazda 2 (2002-2007 / DY, MK 1) Today we will explain how to replace the front left headlight bulb on a Mazda 2, model produced from 2002 to 2007. To perform this operation, we shou…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos