Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Fuses Located in the Mazda 2?

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Fuse box

All fuses in the Mazda 2 are divided between two fuse boxes located within the vehicle: this model has one box inside the cabin and another in the engine compartment. The first is positioned on the left side of the dashboard, accessible only by opening the driver's door: it contains fuses for the windscreen wipers, instrument panel lighting, etc. The second box is located on the right side of the engine compartment: it houses the fuses for the airbags, rear lights, etc.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses for the Mazda 2?
Where Are the Fuses for the Mazda 2?
Mazda 2 (2007-2014 / DE, MK 2, DH) The fuses for the Mazda 2 are located inside the designated fuse boxes installed within the vehicle. In this model, you will find two fuse boxes. The…
Guide to Removing the Front Headlamps of the Mazda 2
Guide to Removing the Front Headlamps of the Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) In this brief guide, you will learn how to remove the front headlamps on the second series Mazda 2 in simple and quick steps. First, open the bonnet …
How to Remove the Door Panel on a Mazda 2
How to Remove the Door Panel on a Mazda 2
Mazda 2 (2014-2023 / MK 3, DJ) Today's instructions will show you how to remove the door panel on a Mazda 2. First, open the front door of the vehicle and begin by removing the pla…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos