Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Engine air filter replacement

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Air filter
Operation: Engine air filter replacement

Open the engine hood and locate the filter container located in the air box to the right of the engine. Release the springs applied to the lid by lifting them upwards and then remove the container gently upwards by releasing it from the support. Remove the exhausted filter and insert a new filter. Before inserting the new filter, clean the inside of any dust deposits. Close the air box carefully, making sure that it adheres perfectly to the lid. Reposition it carefully and make sure that the springs are perfectly engaged. Start the engine and check for proper operation.


Posted on 14 July 2023 by ScegliAuto



Engine air filter replacement
Mazda 3 (2003-2009 / BK, MK 1) The engine air filter container is located in the front right part (looking from the front), below the air conveyor: therefore unscrew the side fixin
Engine air filter replacement
Mazda 3 (2009-2013 / MK 2, BL) Open the bonnet and locate the filter container located in the air box to the right of the engine. Release the springs applied to the lid by lifting
How to replace the air filter of the Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) In this new guide dedicated to all Mazda 3 owners (year 2009-2013), we will describe step by step all the necessary steps to successfully and safely

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos