Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Engine oil and oil filter replacement

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Engine oil
Operation: Engine oil and oil filter replacement

Lift the machine and secure it with the special supports so that it cannot fall. The necessary tools are a ratchet wrench, a set of fixed wrenches, a special tool to disassemble the filter and a large basin for collecting the oil. Place the oil collection pan under the engine. Unscrew the oil cap on the engine sump and allow it to drain completely into the pan. With the special tool unscrew the filter and remove the cartridge. Replace the exhausted filter cartridge with a new one and refit the filter. Also replace the copper gasket of the oil cap and that of the filter. Close the oil cap, refit the oil filter and top up with new oil checking the level using the dipstick. Do not disperse the used oil in the environment but take it to the appropriate collection centers.


Posted on 14 July 2023 by ScegliAuto



Engine oil and oil filter replacement
Mazda 3 (2009-2013 / MK 2, BL) Lift the machine and secure it with the special supports so that it cannot fall. Get the oil suitable for the type of vehicle. The necessary tools ar
Engine oil and oil filter replacement
Mazda 3 (2009-2013 / MK 2, BL) Get the oil suitable for the type of vehicle. Lift the machine and secure it with the special supports so that it cannot fall. The necessary tools ar
Engine oil and oil filter replacement
Mazda 3 (2003-2009 / BK, MK 1) Lift the machine and secure it with the special supports so that it cannot fall. The necessary tools are a ratchet wrench, a set of fixed wrenches, a

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos