Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing the Splash Shield

Model: Mazda Mx 5 NB, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Body

See other generations:
Video tutorial

Lift the vehicle on a hydraulic lift or suitable ramps to facilitate access underneath the vehicle; the splash shield is secured to the bodywork with a series of pins along the perimeter and has two side flanges folded upwards: once the pins are unscrewed, you can remove the splash shield and access the oil sump as well as the steering box for any necessary maintenance.

During the removal of the panel, be cautious of any small stones or debris that may have become lodged.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Mazda Mx 5 (2005-2015 / NC, MK 3) The first operation to perform is to remove the plastic trims around the car radio and the climate control buttons: start by removing the plastic tri…
Mazda Mx 5 (1989-1997 / MK 1) In this video, you will find the main instructions for removing and replacing the speedometer cable on the first generation Mazda MX-5. First, get in…
Mazda Mx 5 (2015-2024 / ND, MK 4) To reset the "Service" indicator on a Mazda MX-5, turn on the ignition without starting the engine. Use the touchscreen of the onboard computer to ac…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos