Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement on Mazda 6

Model: Mazda 6 GJ, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Windshield wipers

See other generations:
Video tutorial

As clearly shown in the video, after releasing the wiper arm, lift the entire wiper, arm and blade. At this point, simply slide the blade off the hook by pushing it downwards and then pulling it out. Repeat the process on both front wipers.

As you can see, this is a very simple task that anyone can do, saving money compared to having it done at your trusted garage. Additionally, you can easily find wiper blades available for purchase online.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace Your Car's Wipers
How to Replace Your Car's Wipers
Mazda 6 (2002-2008 / GG, MK 1) Owning a car requires periodic maintenance. Replacing the wipers, which can wear out, is a task you can do yourself. Wipers must always be in perfect…
How to Replace the Cabin Filter in the Mazda 6 2018
How to Replace the Cabin Filter in the Mazda 6 2018
Mazda 6 (2012-2024 / GJ, MK 3) To replace the air filter inside the cabin of your Mazda 6 (2018 model), follow the steps outlined in this mini guide. First, ensure your Mazda 6 is …
Replace the Door Lock on the Mazda 6
Replace the Door Lock on the Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To replace the door lock on the Mazda 6, proceed as follows: 1) Disconnect the battery. 2) Remove the entire door panel, taking care not to damage th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos