Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Shoes

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Brake pads

Before proceeding with the removal of the brake shoes, obtain the specific tool to retract the caliper piston: this is a socket with two pins to insert into the designated holes on the piston to rotate it for retraction. Lift the vehicle on suitable axle stands and remove the wheel; detach the retaining spring on the side of the caliper and unscrew the relevant fixing pins; extract the old shoes and retract the caliper piston using the specific tool. Then apply the new shoes, reinstall the caliper, the spring, and adjust the handbrake cable if necessary.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Rear Brake Pads
Replacement of Rear Brake Pads
Mazda 3 (2003-2009 / BK, MK 1) Lift the vehicle, remove the wheels, and secure it. Carefully detach the caliper by removing the two clips and unscrewing the rear bolts. Remove the …
Guide to Replacing Brake Pads
Guide to Replacing Brake Pads
Mazda 3 (2009-2013 / MK 2, BL) This guide explains step by step and simply how to replace the brake pads of your car, with a bit of patience, passion, and goodwill, without needing…
How to Replace the Rear Brake Discs and Pads
How to Replace the Rear Brake Discs and Pads
Mazda 3 (2003-2009 / BK, MK 1) Place the car on a ramp and lift it to a comfortable height for working. Remove the rear wheel. Take off the brake caliper retaining clip and unscrew…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos