Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to replace the rear brake discs and their pads.

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Brake discs
Operation: How to replace the rear brake discs and their pads.

Place the car on the deck and raise it to a comfortable height to be able to work on it. Remove the rear wheel. Remove the brake caliper retainer and unscrew the two bolts holding them in place. Now remove the two pads from their housing. Unscrew the other two bolts to remove the caliper holder and disc from its position. After cleaning and oiling the wheel bolts, insert the new disc. Clean the bolts and mount the caliper holder. Insert the new pads into their housing and fit the brake calipers. Now carry out the same operations as seen following the opposite procedure. The maintenance operations seen in the images are performed on a Mazda 3.


Posted on 9 September 2023 by ScegliAuto



Replacement brake discs and front pads
Mazda 3 (2003-2009 / BK, MK 1) Lift the car with the jack but secure it using a car stand, remove the wheel and re-enter the brake caliper cylinder by levering the disc and pads wi
Replacement of brake pads and discs
Mazda 3 (2009-2013 / MK 2, BL) Collect the original spare discs then lift the car making it safe and remove the wheel. Then remove the caliper by moving it away. Remove the callipe
Guide to replacing brake pads
Mazda 3 (2009-2013 / MK 2, BL) The following guide explains step by step and in a simple way how to replace the brake pads of your car, with a little patience, passion and good wil

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos