Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Front Headlamps of the Mazda 2

Model: Mazda 2 MK 2, DH, DE - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

In this brief guide, you will learn how to remove the front headlamps on the second series Mazda 2 in simple and quick steps. First, open the bonnet of your car and unscrew the fixing screws of the front bumper to remove it; these can be found at the top and on both sides of the front wheel arches.

Next, unscrew the screws of the headlamp using a socket spanner; disconnect the electrical connector of the bulbs to remove it and replace it with the new one. Now, all that’s left is to reassemble everything by applying the reverse procedure!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlights on the Mazda 2
How to Replace the Front Headlights on the Mazda 2
Mazda 2 (2007-2014 / MK 2, DH, DE) In today's video, learn how to replace the front headlights on the first series Mazda 2. First, open the front bonnet. Remove the retaining clips tha…
How to Install Fog Lights on a Mazda 2 (2007/2010)
How to Install Fog Lights on a Mazda 2 (2007/2010)
Mazda 2 (2007-2014 / MK 2, DH, DE) To install the front fog lights on a Mazda 2 (2007-2010, pre-facelift bumper), you will need TYC lights, identifiable by the codes: 19-0870-11-2 for …
Where Are the Fuses for the Mazda 2?
Where Are the Fuses for the Mazda 2?
Mazda 2 (2007-2014 / MK 2, DH, DE) The fuses for the Mazda 2 are located inside the designated fuse boxes installed within the vehicle. In this model, you will find two fuse boxes. The…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos