Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Mazda 2.

Model: Mazda 2 DJ, MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Front bumper

See other generations:
Video tutorial

Today we will explain how to remove the front bumper of the Mazda 2. To remove the bumper, we need to open the front hood and remove the clips positioned along the entire top of the bumper, being careful not to damage them. We unscrew the upper nuts and, using a 40mm Torx wrench, we also remove the lower nuts.

We remove the wheel arch liners of the front wheels to access the side screws of the bumper. We unscrew the nuts and remove the bumper by disconnecting the central connector.

After removing the bumper, we can proceed with the inspection and maintenance of the grille or headlights.


Posted on 18 December 2025 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Mazda 2?
How to Remove the Front Bumper of the Mazda 2?
Mazda 2 (2007-2014 / MK 2, DH, DE) To remove the front bumper of the Mazda 2, loosen the bolts securing the bumper inside the wheel arch and at the bottom of the bumper itself. Once th…
How to Install Fog Lights on a Mazda 2 (2007/2010)
How to Install Fog Lights on a Mazda 2 (2007/2010)
Mazda 2 (2007-2014 / MK 2, DH, DE) To install the front fog lights on a Mazda 2 (2007-2010, pre-facelift bumper), you will need TYC lights, identifiable by the codes: 19-0870-11-2 for …
How to disassemble the front door panel of the Mazda 2
How to disassemble the front door panel of the Mazda 2
Mazda 2 (2007-2014 / MK 2, DH, DE) In this short guide we will see the instructions that will allow us to disassemble and remove the front door panel of the Mazda 2. First, we open the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos