Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Bongo Brawny
  6. : How to replace the rear brake pads on the Mazda Bongo Brawny

Mazda Bongo Brawny - Video tutorial

Model: Mazda Bongo Brawny - Years 1995-2005
Part: Brake pads
Operation: How to replace the rear brake pads on the Mazda Bongo Brawny

In today's video tutorial we will see how to disassemble and replace the rear brake pads of the Mazda Bongo Brawny, following these simple steps. First of all we lift the car on the rear side and start removing the wheel; after which we unscrew the fixing screws of the rear brake caliper, in order to remove it from the disc, as shown in the video. At this point we remove and replace the brake pads with new ones, of excellent quality; let's clean up the dirt from the caliper and put pressure on the piston to make it retract, following the video to the end!


Posted on 16 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos